Home Docs Installation Guides

ThunderMax 18 mm O2 Bungs and Placement Guidance

Updated on Nov 13, 2026

ThunderMax AutoTune uses heated 18 mm wideband oxygen sensors with M18 x 1.5 threads. A 12 mm bung does not accept these sensors. Check the exhaust actually installed on the motorcycle before selecting parts.

View / Download the 18 mm O2 Bungs Guide — PDF

Factory-bung model-year guide

Model 18 mm range 12 mm range
Dyna 2006–2011 2012 onward
Touring 2007–2009 2010 onward
Softail 2007–2011 2012 onward
V-Rod 2008–2011 2012 onward
Sportster 2008–2013 2014 onward

These historical factory ranges are a guide. Replacement or aftermarket exhausts may differ. Confirm the installed bung size, sensor clearance and placement before ordering.

Options for exhaust without suitable bungs

Use a compatible exhaust with suitable 18 mm ports, or have appropriate 18 mm weld-in bungs installed. ThunderMax offers straight bungs (272-200) and angled bungs (272-202), sold individually; two are required.

Confirm placement and unused ports

Follow the model-specific installation instructions and confirm placement with the exhaust manufacturer. If both bung sizes are present, use the appropriate 18 mm locations and plug unused 12 mm locations as required.

Sensor compatibility: Matching thread size alone does not make a factory narrowband sensor interchangeable with a ThunderMax heated wideband sensor.

Need help?

Contact ThunderMax technical support or email support@thunder-max.com with your questions.

Based on the ThunderMax “18 mm O2 Bungs” technical document, version 0.3, dated November 12, 2026.