Home Docs Troubleshooting

Inspect for a Missing ThunderMax Vacuum Cap

Updated on Nov 13, 2026

A missing cap leaves the intake vacuum tube open, creating a vacuum leak. This can affect idle and fueling. Check the cap before continuing tuning.

View / Download the Missing Vacuum Cap Guide — PDF

Step 1: Approach the right side

Approach the right side of the motorcycle.

Step 2: Look under the fuel tank

Use a light to look under the fuel tank at the air-cleaner location, on top of the throttle body.

Step 3: Look between the cylinders

Look between the cylinders; the tube is set back and can be difficult to see.

Step 4: Find the steel vacuum tube

Find the 1/4-inch steel vacuum tube. It should have a rubber cap.

View under the fuel tank with the throttle-body vacuum tube circled in red

Vacuum-cap inspection reference showing the tube location. View the full-size image.

Step 5: Verify the cap and replace it if missing

Verify the cap is present. Replace it if missing.

Replace the cap with a rubber vacuum cap from an auto-parts store, or use a short section of vacuum hose with a small bolt plugging its end. The hose-and-bolt arrangement is more secure, although less tidy and usually hidden from view.

After replacing a missing cap: If AutoMaps have been performed, consider reloading the Base Map. If no AutoMaps have been performed, clear the learned offsets.

Need help?

Contact ThunderMax technical support or email support@thunder-max.com with your questions.

Based on the ThunderMax “Missing Vacuum Cap” technical document, version 0.5, dated November 11, 2026.