Home Docs Tuning & AutoTune

ThunderMax Quick Shift

Updated on Nov 09, 2026

The Quick Shift feature in TMax Tuner allows clutchless upshifting on the supported Gen2 M8 models listed below. Its two settings are Shift Assist Threshold and Shift Assist Kill Time.

View / Download the Quick Shift Guide - PDF

On this page

Requirements and supported models

  • TMax Tuner Software 2026.0.6 or newer.
  • Firmware 7.1 dated May 15, 2026, or newer.
  • All 2023.5-and-newer Gen2 M8-equipped Touring models.
  • 2025-and-newer Gen2 M8-equipped Softails.

Clutchless downshifting is not operated by this feature. The guide describes it for a straight-line, start-to-finish drag-race scenario where a clutchless downshift is not required.

Watch the Quick Shift video

Watch Quick Shift - TMax Tech Tips

View / Download the video QR code - PDF

1. Find the Quick Shift settings

In the left-hand software tree under Tuning Maps, open Module Configuration > Basic Settings. Locate Shift Assist Threshold and Shift Assist Kill Time.

Basic Settings showing Shift Assist Threshold and Shift Assist Kill Time

Basic Settings showing Shift Assist Threshold and Shift Assist Kill Time

2. Shift Assist Threshold

Shift Assist Threshold controls shift-lever sensitivity when performing a clutchless Quick Shift:

  • Lower value: more sensitive.
  • Higher value: less sensitive.

Note: A lower, more sensitive value may cause unwanted behavior if the rider’s footwear contacts the shifter and the ECM interprets that contact as a Quick Shift request.

Shift Assist Threshold dialog showing shift-lever sensitivity adjustment

Shift Assist Threshold dialog showing shift-lever sensitivity adjustment

3. Shift Assist Kill Time

Shift Assist Kill Time is the time, in milliseconds, used to unload the transmission for a Quick Shift:

  • Higher value: the transmission is unloaded for longer.
  • Lower value: the transmission is unloaded for less time.

Note: A value that is too low may not allow enough time for the transmission to unload and the clutchless Quick Shift to be performed.

Shift Assist Kill Time dialog showing the transmission-unload time setting

Shift Assist Kill Time dialog showing the transmission-unload time setting

Need help?

Contact ThunderMax technical support or email support@thunder-max.com with any questions.

Based on the ThunderMax “Quick Shift” guide, version 1.8, dated October 27, 2026.