Home Docs Tuning & AutoTune

ThunderMax Decel Fuel Cut Settings

Updated on Nov 13, 2026

Decel Fuel Cut turns fuel off during qualifying closed-throttle deceleration to help reduce exhaust popping. On motorcycles equipped with AutoTune, enable it only when needed and adjust the operating RPM range to suit the condition. The feature is off by default.

View / Download the Decel Fuel Cut Guide — PDF

Note: The illustrated value-entry dialogs require firmware version 4.5 or higher. Values shown in the screenshots are examples; verify the settings for your application.

Step 1: Locate Decel Fuel Cut

In the Tuning Maps tree, open Module Configuration > Basic Settings, then locate Decel Fuel Cut.

TMax Tuner Basic Settings window showing Decel Fuel Cut, RPM Low, RPM High and Decel Post Fuel Enrichment controls

Decel Fuel Cut controls in Basic Settings. Screenshot values are examples. View the full-size image.

Step 2: Enable or disable Decel Fuel Cut

Select 0 to disable Decel Fuel Cut or 1 to enable it. Leave the feature disabled if the motorcycle does not pop on deceleration.

Decel Fuel Cut value-entry dialog showing 0 for disabled and the firmware 4.5-or-higher requirement

Example: disabled (0). View the full-size image.

Decel Fuel Cut value-entry dialog showing 1 for enabled and the firmware 4.5-or-higher requirement

Example: enabled (1). View the full-size image.

Step 3: Set Decel Fuel Cut RPM Low

Use the lowest RPM where popping occurs as a reference. The default is 2048 RPM, adjustable from 1280 to 3040 RPM. Note where popping stops and set RPM Low approximately 50 RPM below that point. Fuel cut ends and normal delivery resumes below this RPM.

Step 4: Set Decel Fuel Cut RPM High

Use the highest RPM where popping occurs as a reference. The default is 2400 RPM, adjustable from 2048 to 4064 RPM. Note where popping begins and set RPM High approximately 50 RPM above that point. Reaching this RPM during acceleration triggers the fuel-cut function.

Understand the three operating scenarios

  • Action 1: Both Low and High RPM thresholds are reached; fuel cut is triggered, activated and then deactivated.
  • Action 2: High RPM is not reached; fuel cut is neither triggered nor activated.
  • Action 3: Once triggered, fuel cut does not deactivate until engine RPM falls below RPM Low.

RPM-versus-time diagram illustrating the three Decel Fuel Cut trigger, activation and deactivation scenarios

Three operating scenarios. Illustrated RPM values are examples. View the full-size image.

Step 5: Adjust Decel Post Fuel Enrichment

This setting smooths the off-to-on throttle transition, like an accelerator pump. It prevents the manifold from becoming dry during extended deceleration, which can cause a pause or lag when the throttle opens. Range: 0–100. Default: 16.08.

Need help?

Contact ThunderMax technical support or email support@thunder-max.com with your questions.

Based on the ThunderMax “Decel Fuel Cut” technical document, version 0.5, dated November 12, 2026.