Home Docs Troubleshooting

ThunderMax U04000 Diagnostic Code

Updated on Nov 09, 2026

Customers may occasionally observe DTC U04000 - Invalid Data Received from Another Control Module on 2023.5-and-newer Harley-Davidson® Touring models equipped with the Skyline™ Operating System.

U04000 is a communication-related diagnostic code. It is generated when a motorcycle control module detects data that differs from what it expects during communication over the CAN network. Multiple modules exchange information to verify vehicle identity, module configuration and operating status.

View / Download the U04000 Diagnostic Code Guide - PDF

On this page

Why the code may appear

U04000 is not exclusive to motorcycles equipped with a ThunderMax ECM. It may occur on otherwise stock motorcycles or after changes to components, module programming, firmware or aftermarket devices that communicate with the CAN network. These changes can involve the BCM, ECM, IFCU, module firmware, or aftermarket tuning and control devices.

CAN-network configuration and module communication can vary between motorcycles. One motorcycle may store U04000 while another with a similar configuration does not. Installing a ThunderMax ECM is one change to the CAN network and, in some applications, may cause a factory module to store U04000 during its communication or validation process.

1. What does U04000 mean?

The ThunderMax v2.6 guide describes U04000 as an informational communication fault that does not indicate a malfunction of the ThunderMax ECM or other components.

The guide states that U04000 does not affect motorcycle operation, reliability or performance when all of the following are true:

  • The motorcycle starts normally.
  • It runs normally.
  • Throttle response is normal.
  • There are no drivability concerns.
  • There are no additional communication-related DTCs.

2. Does U04000 affect engine operation?

The presence of U04000 alone does not indicate a problem with:

  • Fuel delivery
  • Ignition timing
  • AutoTune operation
  • Ride quality
  • Engine performance
  • Power output
  • Reliability

U04000 indicates that a module detected CAN-network data outside its expected parameters. This can occur with stock configurations, module or firmware changes, or aftermarket components that communicate on the CAN network.

For diagnostic procedures and support data collection, use the published Collect and Send ThunderMax Support Data guide.

Need help?

Contact ThunderMax technical support or email support@thunder-max.com with any questions.

Based on the ThunderMax “U04000 Diagnostic Code” guide, version 2.6, dated October 27, 2026.