Tuning & AutoTune

8 Docs

ThunderMax Decel Fuel Cut Settings

Last Updated: 13th November, 2026

Decel Fuel Cut turns fuel off during qualifying closed-throttle deceleration to help reduce exhaust popping. On motorcycles equipped with AutoTune, enable it on...

ThunderMax Decel Pop Tuning

Last Updated: 12th November, 2026

Deceleration pop depends on the engine, exhaust and rider preference. Use the following procedure to develop deceleration and transition fueling before deciding...

ThunderMax Throttle Progressivity

Last Updated: 12th November, 2026

Throttle Progressivity defines how the throttle body responds to rider input. It modifies the relationship between throttle grip position and throttle blade ope...

ThunderMax Quick Shift

Last Updated: 2nd November, 2026

The Quick Shift feature in TMax Tuner allows clutchless upshifting on the supported Gen2 M8 models listed below. Its two settings are Shift Assist Threshold and...

ThunderMax Launch Control (Two-Step)

Last Updated: 2nd November, 2026

ThunderMax Launch Control, also called Two-Step, is a performance feature designed strictly for closed-course drag racing. It holds the engine at a preset stagi...

ThunderMax Heat Management Strategy

Last Updated: 2nd November, 2026

ThunderMax manages engine heat through airflow needs, fueling, ignition timing and idle-speed adjustments. It does not disable a cylinder or support the Harley-...

ThunderMax AutoTune Checkup Guide

Last Updated: 29th October, 2026

Use ThunderMax AutoTune Points Analyzer to check learned tuning points. Connect to the ECU, read the map, then review the summary and run AutoMap only when prom...

Using ThunderMax AutoMap

Last Updated: 28th October, 2026

Use ThunderMax AutoMap to write learned fuel adjustments into the fuel map. Follow the recommended dialog sequence and confirm offsets are reset to 0. AutoMap i...